pH Booster
Raises and holds boiler water alkalinity in the correct range so steel surfaces stay passive and acidic corrosion is prevented.
Overview of the chemicals, plant equipment, membranes, valves and spares we supply.
Manufacturer and bulk stockist for industrial water treatment chemicals and plant replacement components. Hover over or tap any product to see its image.
How our chemicals work
Every chemical programme is selected for the plant it protects. See what each of our boiler, cooling tower, ETP / STP and RO chemicals does.

Protect boiler tubes, drums and condensate lines from scale, corrosion and carry-over while improving fuel efficiency.
Raises and holds boiler water alkalinity in the correct range so steel surfaces stay passive and acidic corrosion is prevented.
Keeps hardness salts and iron as soft, non-sticky sludge that stays suspended and leaves with blowdown instead of baking onto tubes.
Sequester calcium, magnesium and silica to stop hard scale forming on heating surfaces, keeping heat transfer high and fuel use low.
Remove dissolved oxygen from feed water to prevent pitting corrosion in the boiler, economiser and feed lines.
Condition soot, slag and clinker on the fire side, improving combustion and keeping flue passages and tubes clean.
Break foam in boiler water to prevent priming and carry-over of water and dissolved solids into the steam.
Form a protective film on boiler and condensate-line metal to prevent corrosion caused by oxygen and carbon dioxide.
Dissolve existing scale and rust deposits during shutdown cleaning, restoring heat transfer and extending tube life.
Neutralise residual acid after descaling and rebuild a passive oxide layer so freshly cleaned metal does not flash-rust.

Keep heat exchangers, condensers and fills clean and corrosion-free so the cooling circuit delivers design approach temperature.
Phosphate, zinc and alloy-based programmes form a protective film on mild steel, copper and alloy surfaces of exchangers and pipelines.
Keeps calcium carbonate, sulphate and silica in solution at higher cycles of concentration, preventing scale and saving make-up water.
Kill bacteria, fungi and Legionella in recirculating water; alternating both types prevents microbial resistance.
Control algae on basins, decks, distribution channels and fills exposed to sunlight, preventing blockage and fouling.
Loosen and lift biofilm and slime so biocides penetrate better and debris is flushed out with blowdown.
Emulsify oil and grease leaking in from the process so they do not coat heat-exchanger surfaces or foul fill media.
Clean organic and biological fouling from system surfaces during online or offline cleaning to restore heat-transfer efficiency.


Help effluent and sewage treatment plants meet discharge norms for COD, BOD, TSS, colour and odour, and handle sludge efficiently.
Cationic and anionic polymers bridge fine particles into large, fast-settling flocs in clarifiers, improving TSS and COD removal.
Conditions sludge before the filter press, belt press or centrifuge so water separates easily and a drier cake is produced.
Removes dye and colour from textile, paper, pharma and distillery effluent by coagulating colour molecules for separation.
Knock down foam in aeration, equalisation and outlet tanks, preventing overflow and improving oxygen transfer.
Lime neutralises acidic effluent and precipitates heavy metals; alum coagulates suspended solids and phosphate in primary treatment.
Specialised bacteria and nutrients seed and boost biological treatment, speeding start-up, improving BOD/COD reduction and controlling odour.

Protect RO and UF membranes from scaling, fouling and chlorine damage so the plant keeps its output, recovery and salt rejection.
High/low silica and high/low pH grades prevent carbonate, sulphate, silica and metal scale on membranes, allowing higher recovery.
Acidic cleaners dissolve inorganic scale and metal oxides such as calcium carbonate and iron from the membrane surface.
Alkaline cleaners remove organic fouling, biofilm and colloidal silt that reduce permeate flow.
Complete clean-in-place programmes restore flux and salt rejection without dismantling membranes from the pressure vessels.
Neutralise residual chlorine in RO feed water to protect polyamide membranes from irreversible oxidation damage.
Disinfect raw water and pre-treatment to control bacterial growth before filtration and membranes.
Clean UF membranes of organics, biofouling and particulates to recover permeability and backwash efficiency.
Lowers feed pH to limit carbonate scaling and is used for acid cleaning and cation resin regeneration.
Raises pH for alkaline membrane cleaning and silica control, and regenerates anion exchange resin.
Oxidising disinfectant for raw water, storage tanks and pre-treatment sanitisation.
Dechlorinates RO feed water and preserves membranes during storage or plant shutdown.

Boiler, cooling tower, waste water and RO treatment chemicals.

Spares for cooling towers, waste water, RO and softener plants.

Ball, butterfly, globe, gate and diaphragm valves.

Strainers, water testing kits, sensors and meters.

Boiler key parts, major parts and other spare parts.